Home | Introduction | Web Interface | TFT Display | Appendix | Glossary

Filter

From the top-level menu of the web interface to the switch

click on Filter and the following web page will appear. This web page lists all switch traps that can be enabled for logging information.

After checking any of the desired switch traps, click Apply. There are also Check All and Uncheck All buttons for convenience. Only traps occurring after they are enabled will appear in the Log, which should refresh itself on browser reload or when you click the Refresh button.

These traps are a summary of the diagnostic counters for all of the components within the switch chassis. A brief description of each of these traps can be obtained by clicking on the respective trap below, or referencing the Glossary.

• uc_reset

• overtemp_shutdown

• reestablish_connection

• uc_dead

• fan_tray_missing

• ac_bad

• dc_bad

• bad_crc

• illegal_symbol

• dead_port

• receive_timeout

• overrun

• local_synch

• quad_port_signal_lost

• sff_port_signal_lost

• xbar_self_test

• sff_port_self_test

• remote_fault

• cx4_port_self_test

• 10ge_port_dead

• firmware_fault

• lost_communication

• slot_changed

• fan_bad

• fan_tray_reinstalled

• ac_good

• dc_good

• invalid_route

• missed_beat

• port_up

• transmit_timeout

• port_down

• remote_synch

• module_fault

• overcurrent

• quad_port_self_test

• local_fault

• invalid_head

• cx4_port_signal_lost

Last updated: 21 February 2007