Home | Introduction | Web Interface | TFT Display | Appendix | Glossary

Upgrade Monitoring Card Firmware

To upgrade the switch firmware on the monitoring line card, as well as the switch firmware on all of the line cards in the switch:

1. Download the latest switch firmware from the ftp site.

   http://www.myri.com/ftp/pub/xbar32/shipfs.img

2. From the top-level menu of the web interface to the switch

   

   Click on Upgrade Monitoring Card Firmware on the top-level web interface to switch and the following webpage will appear.

   

3. Click on Browse on this webpage

   

   and select the location of the switch firmware (shipfs.img).

4. Click on Upgrade Firmware,

   

5. When the upgrade has completed, the following webpage will appear

   

6. Click on reboot and the following reboot webpage for the monitoring line card will appear.

   

   Check the reboot box and all ucs, and then click Apply and all of the line cards will be rebooted.

Note: These instructions are also summarized in the following FAQ entry How do I update the switch firmware on the Clos256 Myrinet-2000 Switch?

Last updated: 20 August 2007