l3clock [-u unit] [-c clock value] [-v version]]
l3clock sets the so called "clock" register of a LANai chip. Only the LANai3.x and LANai4.x chips have a clock register. If you don't specify a LANai board number (unit), l3clock uses unit 0. If you don't specify a clock value clock value, l3clock reads a clock value from the LANai boards PROM, and uses that value as the LANai chips clock value. You must set the clock value of your LANai board whenever you restart your computer.
metis 26% l3clock -u 0 clockval[0] set to 0x11071107 metis 27% |