print_routes unit filename
print_routes prints out in a fairly unreadable form the route table of a Myricom MCP. You must specify the board number of the MCP, and the ".dat" file that was loaded into the board. print_routes fails if the route table was being updated while print_routes was called. If this happens you should try print_routes again. The first number on each line is the least significant 32 bits of the MCP address. The rest of each line is the route.
metis 45% print_routes 0 ~/myrinet/lib/lanai/mcp4.dat die: couldn't spew routes metis 46% !! print_routes 0 ~/myrinet/lib/lanai/mcp4.dat 4 -4 3 5 -4 6 8 -2 202f5400 2 |